Motorola WiNG 4.4 Reference Manual page 302

5 - 22 WiNG 4.4 Switch System Reference Guide
8. Click OK to save the new configuration and close the dialog window.
9. Click Cancel
5.2.9.2 Adding a New DHCP Pool Class
The Add DHCP Pool Class Configuration
DHCP User Class, to an existing pool, created using
4 pool class address range. To add a new DHCP pool class:
1. Select Services > DHCP Server
2. Select the Pool Class
3. Click on the Add
4. Use the Pool Name
page 5-7.
5. Use the Class Name
6. The Pool Class Address Range
address ranges can be assigned to a class.
a. Use the Insert
b. Select a address range and click
7. Refer to the Status
GET" operation from the applet. The Status field displays error messages if something goes wrong in the transaction
between the applet and the switch.
8. Click OK to save the new configuration and close the dialog window.
9. Click Cancel
to close the dialog without committing updates to the running configuration.
dialog is used to associate an existing class, created using
from the main menu tree.
tab.
button from the Pool Class Names
field to define a new pool name. Enter the pool name created using Adding a New DHCP Pool on
field to associate an existing class, created using Adding a New DHCP User Class on page 5-18.
field is used to assign address range to the class inside the pool. A maximum of 4
button to enter the Start IP and End IP address range for a class.
Remove
field. It displays the current state of the requests made from the applet. Requests are any "SET/
to close the dialog without committing updates to the running configuration.
Adding a New DHCP Pool. It is also used to configure a maximum of
section.
to delete that particular address range.
Adding a New