Configuring Wmm - Motorola WiNG 4.4 Reference Manual

4 - 136 WiNG 4.4 Switch System Reference Guide
3. With the Select Radios/BSS
and 802.11an) from the
4. Select the desired BSS from the
802.11an) to modify.
5. Refer to the Select/Change Assigned WLAN
Primary WLAN
Assign
Index
Description
ESS ID
VLAN
6. Click Apply to save the changes made within the screen.
7. Click Revert to cancel the changes made and revert back to the last saved configuration.

4.8.4 Configuring WMM

Use the WMM tab to review each radio type, as well as the Access Category that defines the data (Video, Voice, Best
Effort, and Background) the radio has been configured to process. Additionally, the
intervals defined for the target access category.
To view existing WMM Settings:
1. Select Network Setup
field, select the radio type to configure (802.11b, 802.11bg and 802.11bgn or 802.11a
Select Radio drop-down menu.
BSS list or select a
If a specific BSS was selected from the
WLANs from the drop-down menu as the primary WLAN for the BSS.
If the radio was selected, the applet will automatically assign one WLAN to each BSS in
order, and that WLAN will be set as the
If the number of WLANs selected is greater than the number of BSSIDs, the remaining
WLANs are included with the last BSS.
Assign the WLAN(s) to the selected BSS or Radio.
Displays (in ascending order) the numerical index assigned to each SSID. Use the index (along
with the WLANs name) as a means of identifying WLANs once assigned to different radio
BSSIDs. A BSSID cannot support two WLANs with the same numerical index.
Use the WLAN description (along with the WLANs index) as a means of identifying WLANs
assigned to different radio BSSIDs. A BSSID cannot support two WLANs with the same
description.
Displays the assigned SSID uniquely distributed between the WLANs assigned to the
BSSIDs.
Displays the VLAN ID of VLANs assigned to WLANs. By default, all WLANs are assigned to
VLAN 1.
> Radio Adoption Defaults
Radio (802.11b, 802.11bg and 802.11bgn or 802.11a and
field for the following information:
Select Radio/BSS
Primary WLAN
from the main menu tree.
area, choose one of the selected
for the BSS.
WMM tab displays the transmit