Motorola WiNG 4.4 Reference Manual page 199

2. Click the Configuration
3. Click the Global Settings
4. Click the Configure Port Authentication
5. Enter the 802.1x
6. Enter the 802.1x
adoption.
NOTE: The default user name and password for AP300 port authentication is a user name
of admin
7. Check the Use Default Values
Access Port can get disconnected if the 802.1x authenticator is not configured accordingly.
NOTE: 802.1x username and password information is only passed to adopted Access
Ports when the Username and Password are set. Any AP adopted after this does not
automatically receive a username and password.
NOTE: After setting the username and password to factory default settings, the system
must be rebooted before the factory default settings are applied
8. Refer to the Status
something goes wrong in the transaction between the applet and the switch.
9. Click OK to use the changes to the running configuration and close the dialog.
10.Click Cancel to close the dialog without committing updates to the running configuration.
4.7.1.3 Editing AP Settings
The Edit screen provides a means of modifying the properties of an existing radio. This is often necessary when the radio's
intended function has changed and its name needs modification or if the radio now needs to be defined as a detector radio.
The Edit screen also enables you to modify placement, channel, and power settings as well as a set of advanced properties
in case its transmit and receive capabilities need to be adjusted.
NOTE: The screen display can vary slightly depending on whether the Access Port radio is
an 802.11b, 802.11bg and 802.11bgn or 802.11a and 802.11an model.
To edit a radio's configuration:
1. Select Network
2. Click the Configuration
tab.
button.
button.
Username assigned to the Access Port.
Password (for the corresponding username) providing authorization for Access Port authorization
and a password of symbol.
option checkbox to set the Username and Password to factory default values. The
field for the current state of the requests made from applet. This field displays error messages if
> Access Port Radios from the main menu tree.
tab.
Network Setup 4 - 95