Multiple Spanning Tree - Motorola WiNG 4.4 Reference Manual

To configure the MSTP bridge:.
To configure the MSTP bridge:
1. Select Network >

Multiple Spanning Tree

2. Select the Bridge tab (should be the displayed tab by default).
3. Refer to the MSTP Parameter
Global MSTP Status Use the drop-down menu to define MSTP status. The default is Enabled.
Max Hop Count Displays the maximum allowed hops for a BPDU (Bridge Protocol Data Unit) in an MSTP region. This
value is used by all the MSTP instances.
Supported Versions Displays the different versions of STP supported.
Protocol Version Displays the current protocol version in use. Available MSTP protocol versions are:
•
•
•
•
•
MST Config. Name Enter a name for the MST region. This is used when configuring multiple regions within the network.
Each switch running MSTP is configured with a unique MST region name. This helps when keeping track
of MSTP configuration changes. Increment this number with each configuration change. The revision-
level specifies the revision-level of the current configuration.
MST Revision Level Assign a MST revision level number to the MSTP region to which the device belongs. Each switch
running is configured with a unique MSTP name and revision number. This helps when keeping track of
MSTP configuration changes. Increment this number with each configuration change. The revision level
specifies the revision level of the current configuration.
Error Disable Timeout Select this option to enable an error disable-timeout facility. The error disable-timeout is used to set a
timeout value for ports disabled resulting from a BPDU guard.
The BPDU guard feature shuts down the port on receiving a BPDU on a BPDU-guard enabled port.
ID Format Selector Displays the ID format currently in use.
from the main menu tree.
field to view or set the following:
forceNonStp
forceLegacyDot1d
forceDot1w
autoDot1s
unknown
Network Setup 4 - 153