Motorola WiNG 4.4 Reference Manual page 278

4 - 174 WiNG 4.4 Switch System Reference Guide
4.12.1.4 Configuring a RADIUS Server
1. Select Network
Radius Configuration
2. Refer to the Radius
RADIUS Server
Address
RADIUS Port
RADIUS Shared
Secret
Server Timeout
Server Retries
Dynamic
Authorization
> Wired Hotspot > Edit > Radius
screen contains tabs for defining the Radius server settings.
field and define the following credentials for a primary and secondary Radius server.
Enter the IP address of the primary and secondary servers acting as the Radius user
authentication data source.
Enter the TCP/IP port number for the primary and secondary servers acting as the Radius user
authentication data source. The default port is 1812.
Provide a shared secret (password) for user credential authentication with the primary or
secondary Radius server.
Enter a value (between 1 and 300 seconds) to indicate the number of elapsed seconds
causing the switch to time out on a request to the primary or secondary server.
Enter a value between 1 and 100 seconds to indicate the number of times the switch attempts
to reach the primary or secondary Radius server before giving up.
Check this option to enable RADIUS Dynamic Authorization. RADIUS Dynamic Authorization
enables the RADIUS administrator to send the disconnect and change of authorization
packets to the switch (NAS) for wired hosts.
Configuration. The Radius Configuration screen opens up. The