Configuring Automatic Updates - Motorola WS5100 Series Reference Manual

3-28 WS5100 Series Switch System Reference Guide
1. Refer to the
select Server.
2. Provide the name of the File.
3. Use the Using
HTTP.
FTP transfers require a valid user ID and password.
4. Enter an IP Address
jeopardizing the success of the file transfer.
5. Enter the User ID
6. Enter the Password
7. Specify the appropriate
depending on the target selected.
8. Use the To drop-down menu (within the Target field) and select Wireless Switch.
9. Use the Browse
10.Click the Transfer
file transfer message.
11.Click Abort

3.6 Configuring Automatic Updates

Use the Automatic Updates
the switch is booted. If updates are found since the last time the switch was booted, the updated version is
uploaded to the switch the next time the switch is booted. Enable this option for either the firmware,
configuration file or cluster configuration file. Motorola recommends leaving this setting disabled if a review
of a new file is required before it is automatically uploaded by the switch.
Source field to specify the details of the source file. Use the
drop-down menu to configure whether the file transfer is conducted using FTP, TFTP or
of the server receiving the configuration file. Ensure the IP address is valid or risk
credentials required to transfer the configuration file from a FTP server.
required to send the configuration file from an FTP server.
Path name to the target directory on the server. The Target options are different
button to browse and select the location to store the file marked for transfer.
button to complete the file transfer. The
button any time during the transfer process to abort the file transfer.
screen to enable a facility that will poll a server address (you designate) when
From drop-down menu and
Message section displays the status of the