Motorola WiNG 4.4 Reference Manual page 287

8. Additionally, define the
Server and DHCP clients.
NOTE: The network IP address and subnet mask of the pool are required to match the
addresses of the layer 3 interface for addresses to be supported on that interface.
9. Within the Lease Time
• Infinite - If selected, the client can used the assigned address indefinitely.
• Actual Interval - Select this checkbox to manually define the interval for clients to use the DHCP server assigned
addresses. The default lease time is 1 day, with a minimum setting of 1 minute.
10.Within the Servers
and remove the IP addresses of the routers used.
11.Modify the Included Ranges
Use the Insert
A network pool without any include range is as good as not having a pool, because it won't be useful in assigning
addresses.
12.Click OK to save and add the changes to the running configuration and close the dialog.
13.Refer to the Status
The Status is the current state of the requests made from the applet. Requests are any "SET/GET" operation from the
applet. The Status field displays error messages if something goes wrong in the transaction between the applet and
the switch.
14.Click Cancel to close the dialog without committing updates to the running configuration.
5.2.1.2 Adding a New DHCP Pool
Add a new DHCP pool as needed to suit the address distribution requirements of your network.
To add a DHCP pool:
1. Select Services
IP Address and Subnet Mask
field, define one of the two kinds of leases the DHCP Server assigns to its clients:
field, change the server type used with the pool and use the
(starting and ending IP addresses) for this particular pool.
and Remove buttons as required to define the range of supported IP addresses.
field.
> DHCP Server from the main menu tree.
used for DHCP discovery and requests between the DHCP
Insert
Switch Services 5 - 7
and Remove buttons to add