Motorola WiNG 4.4 Reference Manual page 43

IEEE Standard Supported Notes
IEEE 802.1x Yes Full support IEEE 802.1x authentication ether with a fully functional integrated RADIUS server built
into our RF Switches and Access Points or an external RADIUS server such as Microsoft IAS,
Microsoft NPS, Cisco Secure ACS, Free RADIUS and Juniper Steel Belted RADIUS (to name a few).
When using the integrated RADIUS server we support the following EAP methods:
• EAP-TLS
• EAP-GTC (PEAPv1)
• EAP-MSCHAPv2 (PEAPv0)
• EAP-TTLS (MD5, PAP, MSCHAPv2)
When using an external RADIUS server the EAP type is transparent to the WLAN infrastructure
allowing any standard EAP method to be supported.
The IEEE 802.1x standard is fully supported on the following Switch Platforms:
• WS2000
• WS5100
• RFS6000
• RFS7000
The IEEE 802.1x standard is fully supported on the following AP Platforms:
• AP100 Access Port
• AP4131 Access Port
• AP300 Access Port
• AP5131 Access Point
• AP5181 Access Point
• AP7131 Access Point
IEEE 802.3u Yes The IEEE 802.3u (100BASE-T) standard is fully supported on the following Switch Platforms:
• WS2000
• WS5100
• RFS6000
• RFS7000
The IEEE 802.3u (100BASE-T) standard is fully supported on the following AP Platforms:
• AP100 Access Port
• AP4131 Access Port
• AP300 Access Port
• AP5131 Access Point
• AP5181 Access Point
• AP7131 Access Point
Overview 1 - 27