Displaying The Management Access Interface - Motorola WiNG 4.4 Reference Manual

7 - 2 WiNG 4.4 Switch System Reference Guide

7.1 Displaying the Management Access Interface

Refer to the main Management Access interface for a high-level overview of the current switch firmware version and the
current switch log output configuration. Use this information to discern whether a switch firmware upgrade is required (by
checking the Website for a newer version) and if the switch is outputting log data appropriately.
NOTE: When the switch's configuration is successfully updated (using the Web UI), the
effected screen is closed without informing the user their change was successful.
However, if an error were to occur, the error displays within the effected screen's Status
field and the screen remains displayed. In the case of file transfer operations, the transfer
screen remains open during the transfer operation and remains open upon completion
(with status displayed within the Status field).
To display the main Management screen:
1. Select Management Access
2. Refer to the Current Status
Firmware In Use
Log Output
NOTE: The
screen, as this screen is has no configurable parameters for the user to update and save.
from the main menu tree.
field to review the following read-only information:
The Firmware In Use value displays the software version currently running on the switch. Use this
information to assess whether a firmware update would improve the switch feature set and functionality.
The Log Output value displays the target location for log files output by the switch.
Apply and Revert functions are greyed out within the Management Access