Motorola WiNG 4.4 Reference Manual page 524

8 - 18 WiNG 4.4 Switch System Reference Guide
7. If Server has been selected as the source, use the
will be sent using FTP or TFTP.
8. If Server has been selected as the source, enter the
panic file.
9. If Server has been selected as the source, enter the
The User ID is required for FTP transfers only.
10.If Server has been selected as the source, enter the
location.
11.Specify the appropriate path name to the target directory on the local system disk or server as configured using the
"To" parameter. If local server is selected, use the Browse button to specify a location on your local machine.
12. Refer to the Status
something goes wrong in the transaction between the applet and the switch.
13.Click the Transfer
to move each desired log file to the specified location.
14.If a problem condition is discovered during the file transfer, click the
15. Click the Close
field for the current state of the requests made from applet. This field displays error messages if
button when ready to move the target file to the specified location. Repeat the process as necessary
button to exit the dialogue and abandon the transfer.
Using drop down-menu to configure whether the panic file transfer
IP Address of the destination server or system receiving the target
User ID credentials required to send the file to the target location.
Password required (for FTP transfers) to send the file to the target
Abort button to terminate the transfer.