Table of Contents
Advertisement
6 - 20 WiNG 4.4 Switch System Reference Guide
4. Click the
Add
button.
5. Define a
WLAN Index
6. Use the
IP ACL
7. Use the
MAC ACL
8. Select either the
9. Refer to the
Status
goes wrong in the transaction between the applet and the switch.
10.Click
OK
to use the changes to the running configuration and close the dialog.
11.Click
Cancel
6.4.3 Attaching an ACL Layer 2/Layer 3 Configuration
Use the
Attach-L2/L3
To attach an interface:
1. Select
Security
2. Click the
Security Policy
button to create a new ACL WLAN association or highlight an existing association and click the
between 1 and 32.
drop-down menu to select an IP ACL for the WLAN.
drop-down menu to select the MAC ACL for the WLAN interface.
Inbound
or
Outbound
radio button to define which direction the ACL applies.
field for the state of the requests made from applet. This field displays error messages if something
to close the dialog without committing updates to the running configuration.
screen to view and assign the ACL to a physical interface or VLAN.
>
Wireless Firewall
from the main menu tree.
tab.
Edit
Advertisement
Table of Contents
Troubleshooting
