Associating An Acl With Wlan - Motorola WiNG 4.4 Reference Manual

6 - 32 WiNG 4.4 Switch System Reference Guide
8. To modify the zone associated with the ACL select a
to 48. Creating zones allows you to associate firewall policies to each zone. All members of the same zone will have
the same firewall policies applied to them.
9. Use the drop-down menu to select
This rule applies to MUs within the specified Starting and Ending MAC Address range. For example, if the adoption
rule is to Allow, access is granted for all MUs within the specified range.
10.Refer to the Status
something goes wrong in the transaction between the applet and the switch.
11.Click OK to use the changes to the running configuration and close the dialog.
12.Click Cancel

6.4.10 Associating an ACL with WLAN

Use the Membership
membership permission restrictions.
To associate a filter ACL index with a WLAN:
1. Select Security
2. Click the Security Policy
3. Click the Wireless Filters
4. Select one or more of the existing ACLs from the filters list.
5. Click the Memberships
6. Select the box to the right of each WLAN you want associated with the ACL.
Selecting a WLAN maps it the MAC address range and allow or deny designation assigned to it. Consequently, be sure
you are not restricting MU traffic for a WLAN that requires those MAC addresses to interact with the switch.
Allow
field for the current state of the requests made from applet. This field displays error messages if
to close the dialog without committing updates to the running configuration.
screen to define a name for the ACL index and map the index to WLANs (1-32) requiring
> Wireless Firewall from the main menu tree.
tab.
tab.
button.
Zone ID from the pull-down menu. Zone numbers range from 1
or Deny.