Motorola WiNG 4.4 Reference Manual page 72

3 - 14 WiNG 4.4 Switch System Reference Guide
2. Select the Configuration
Name
Aggregation Membership
(RFS7000, RFS4000)
MAC Address
Admin Status
Speed
Duplex
Medium Type
Switch Note: On a RFS7000, the MAC address for the me1 port changes when the switch
firmware is updated to the 1.3 version. This addresses an issue where the switch MAC
address and ge1 interface shared the same MAC address in previous versions.
3. Select a port and click the
Configuration on page
tab to display the following read-only information:
Displays the current port name. The port names available vary by switch.
RFS6000: ge1, ge2, ge3, ge4, ge5, ge6, ge7, ge8, me1, up1, wan
RFS7000: ge1, ge2, ge3, ge4, me1
RFS4000: ge1, ge2, ge3, ge4, ge5. up1
The Aggregation Membership value displays the channel group the port is a member of.
Displays the port's MAC Address. This value is read-only, set at the factory and cannot be
modified.
Displays whether the port is currently Up or Down.
Displays the current speed of the data transmitted and received over the port.
Displays the port as either half or full duplex.
The Medium Type value displays the physical connection type of the port. Medium types
are:
• Copper: Used on RJ-45 Ethernet Ports
• Optical: Used on Fiber Optic Gigabit Ethernet Ports
Edit button to modify the port configuration. For additional information, see
3-15.
Editing the Port