Transferring A Config File - Motorola WiNG 4.4 Reference Manual

3 - 28 WiNG 4.4 Switch System Reference Guide
Use the up and down navigation facilities on the right-hand side of the screen to view the entire page.
3. The Page parameter displays the portion of the configuration file in the main viewing area.
The total number of pages in the file are displayed to the right of the current page. The total number of lines in the file
display in the Status field at the bottom of the screen.
Scroll to corresponding pages as required to view the entire contents of the file. To navigate to a specific page, enter
the page number in the text area (next to Page item) and click on the
depending on the source selected.
4. Refer to the Status
operation from the applet. The
between the applet and the switch.
5. Click the Refresh
6. Click Close to close the dialog without committing updates to the running configuration.

3.3.2 Transferring a Config File

Transfer a configuration file to and from the switch using the
recommended to keep viable configurations available in a secure location. The following file transfer configurations are
possible:
• switch to switch, server, or local disk
• server to switch
• local disk to switch
To transfer the contents of a configuration file:
1. Click the Transfer Files
field for the current state of the requests made from the applet. Requests are any "SET/GET"
Status field displays error messages if something goes wrong in the transaction
button to get the most recent updated version of the configuration file.
button on the bottom of the Configuration screen.
Go button. The source parameter differs
Transfer screen. Transferring the switch configuration is