Table of Contents
Advertisement
1. .Select
Services
>
RTLS
2. Select the
Site
tab.
3. Enter a
Name
and optionally a
Name
Enter a name for the site where locationing is deployed. This is for identification purposes only.
Description
Provide a description of the site where locationing is deployed. This is an optional field.
4. When mapping out a site for locationing an origin point must be selected in one of the corners of the site. That origin
will become the upper left corner of the site map with coordinates of 0,0. The length and width of the site is then
mapped out on the X and Y axes. Those length and width along with the height are entered into the field below.
Define the Dimensions and
Length
Enter the length of the site. This is the X axis of your site map based on the origin point of 0,0. The
size is either in feet or meters depending on which unit of measure is selected below. The valid
range for length is 1-1000m or 1-3000ft.
Width
Enter the width of the site. This is the Y axis of your site map based on the origin point of 0,0. The
size is either in feet or meters depending on which unit of measure is selected below. The valid
range for width is 1-1000m or 1-3000ft.
Height
Enter the height of the site. The size is either in feet or meters depending on which unit of measure
is selected below. The acceptable range for height is 0-20m or 0-60ft. Height is an optional
parameter and is not taken into account by the locationing algorithm.
Unit
Use the pull-down menu to select the unit of measure used for dimensions. The options are feet
or meters.
from the main menu tree.
Description
for the site:.
Unit
of measure used to define the site size:
Switch Services 5 - 65
Advertisement
Table of Contents
Troubleshooting
