Motorola WiNG 4.4 Reference Manual page 133

SA Query Max Define the maximum time (in milliseconds) before an SA Query is timed out. The valid
Timeout timeout range is between 100msec and 6000msec with a default value of 1000msec.
SA Query Retry Define the maximum number of retries before an SA Query is timed out. The valid retry
Timeout range is between 10msec and 1500msec with a default value of 201msec.
NOTE: If the WLAN is to support AAP, the
must be selected. Additionally, the Access Point must have its auto discovery option
enabled to be discovered by the switch. For information on configuring an Access Point for
AAP support, see
NOTE: For a Radius supported VLAN to function, the "Dynamic Assignment" checkbox
must be enabled for the WLAN supporting the VLAN.
NOTE: When configuring wireless settings for Adaptive APs, all configuration must be
done through the switch and not from the AP management console. Making changes
directly in the AP management console can lead to unstable operation of the Adaptive AP.
Independent Mode (AAP Only)
Adaptive AP Configuration.
Network Setup 4 - 29
checkbox