Table of Contents
Advertisement
• Actual Interval - Select this checkbox to manually define the interval for clients to use DHCP supplied addresses.
The default lease time is 1 day, with a minimum setting of 60 seconds and a maximum value of 946080000 seconds.
9. Within the
Servers
and remove the IP addresses of the routers used.
10.Provide the
Included Ranges
Use the
Insert
A network pool without any include range is as good as not having a pool, because it won't be useful in assigning
addresses.
11.Click
OK
to save and add the changes to the running configuration and close the dialog.
12.Refer to the
Status
The Status is the current state of the requests made from the applet. Requests are any "SET/GET" operation from the
applet. The Status field displays error messages if something goes wrong in the transaction between the applet and
the switch.
13.Click
Cancel
to close the dialog without committing updates to the running configuration
5.2.1.3 Configuring DHCP Global Options
The DHCP Server screen's Configuration and Host Pool tabs can be used to display an additional
To define new global name and value and send it to other peer switches in the mobility domain:
1. Select
Services
2. Highlight an existing pool name from within either the Configuration or Host Pool tab and click the
button at the bottom of the screen
3. Click the
Insert
4.
Name
the option as appropriate, assign a
a value of ip or ascii to the DHCP global option. Highlight an entry from within the Global Options screen and click the
Remove
button to delete the name and value.
5. Click
OK
to save and add the changes to the running configuration and forward the updates to the other peer switches
comprising the mobility domain.
6. Refer to the
Status
The Status is the current state of the requests made from the applet. Requests are any "SET/GET" operation from the
applet. The Status field displays error messages if something goes wrong in the transaction between the applet and
the switch.
7. Click
Cancel
to close the dialog without committing updates to the running configuration
field, change the server type used with the pool and use the
(starting and ending IP addresses) for this particular pool.
and
Remove
buttons as required to define the range of supported IP addresses.
field.
>
DHCP Server
from the main menu tree.
button to display an editable field wherein the name and value of the DHCP option can be added.
Code
field.
(numerical identifier) and use the
Switch Services
Insert
and
Remove
buttons to add
Global Options
Options Setup
Type
drop-down options to specify
5 - 9
screen.
Advertisement
Table of Contents
Troubleshooting
