Configuring Access Point Radio Bandwidth - Motorola WiNG 4.4 Reference Manual

4 - 110 WiNG 4.4 Switch System Reference Guide
for larger data packets and contention windows. Use
parameters. WLAN WMM configuration affects your upstream traffic parameters.
To edit existing WMM Settings:
1. Select Network > Access Port Radios
2. Click the WMM
3. Select a radio from the table and click the
radio.
4. Enter a number between 0 and 15 for the
The AIFSN value is the current Arbitrary Inter-frame Space Number. Higher-priority traffic categories should have lower
AIFSNs than lower-priority traffic categories. This will cause lower-priority traffic to wait longer before trying to access
the medium.
5. Enter a number between 0 and 65535 for the
The Transmit Ops value is the maximum duration a device can transmit after obtaining a transmit opportunity. For
higher-priority traffic categories, this value should be set higher.
6. Enter a value between 0 and 15 for the Extended Contention Window minimum
The ECW Min
is selected for the back off mechanism. Lower values are used for higher priority (video or voice) traffic.
7. Enter a value between 0 and 15 for the Extended Contention Window maximum
The ECW Max
is selected for the back off mechanism. Lower values are used for higher priority (video or voice) traffic.
8. Refer to the Status
something goes wrong in the transaction between the applet and the switch.
9. Click OK to use the changes to the running configuration and close the dialog.
10.Click Cancel

4.7.5 Configuring Access Point Radio Bandwidth

Refer to the Bandwidth
represents the switch priority assigned to the traffic transmitted from the radio for the WLAN.
from the main menu tree.
tab.
AIFSN
is combined with the ECW Max
is combined with the ECW Min
field for the current state of the requests made from applet. This field displays error messages if
to close the dialog without committing updates to the running configuration.
tab to view the QoS weight associated with each radio when added to a WLAN. The weight
Configuring WMM on page 4-108
Edit button to launch a screen displaying the WMM configuration for that
value for the selected radio.
Transmit Ops value.
to make the Contention Window. From this range, a random number
to make the Contention Window. From this range, a random number
to configure downstream traffic
(ECW Min) value.
(ECW Max) value.