Debugging The Applet - Motorola WiNG 4.4 Reference Manual

8.5 Debugging the Applet

Refer to the Applet Debugging
a criticality level you define.
1. Select Diagnostics
2. To use this window, select the
The Applet Debugging field is partitioned into the following editable fields:
• Send log message to a file
• Use SNMP v2 only
• Message Severity
• What kinds of message should be seen
3. Select the Send log message to a file
Enabling this checkbox allows you to select the file location where you wish to store the log message.
4. Select the Use SNMP V2 only
Check whether you have access to SNMP v2 by clicking on the
available, the test icon will change from grey to green, indicating the SNMPv2 interface is viable on the switch.
5. Select the severity of the message you wish to store in the log file.
The Message Severity
• Fatal - loss of data or switch functionality
• Error - switch data compilation problem, could result in data loss
• Warning - potential data loss of configuration corruption
• Informational - data that may be useful in assessing a potential error
• Debug - information relevant to troubleshooting
• None - no impact.
screen to debug the applet. This screen allows you to view and debug system events by
> Applet Debugging from the main menu.
Enable Web-UI Debug Mode
checkbox if you wish to store the log message.
checkbox to use SNMP v2 to debug the applet.
section allows you to report a bug and log it as per the following severity levels:
checkbox.
Test SNMP V2 access button. If SNMP v2 access is
Diagnostics 8 - 19