Motorola WiNG 4.4 Reference Manual page 386

6 - 34 WiNG 4.4 Switch System Reference Guide
8. To reset the Hit Count
9. Refer to the Associated Rules
and can be added or existing rules modified. For more information, see Adding a New ACL Rule on page 6-34.
6.4.11.1 Adding a New ACL
When a packet is received by the switch, the switch compares the packet against the ACL to verify the packet has the
required permissions to be forwarded. Often, ACLs need to be added as client permission changes during switch operation.
To create a new ACL:
1. Select Security
2. Click the Configuration
3. Click on the ACL
4. Click the Add
5. Select an ACL Type
• Standard IP List – Uses source IP addresses for matching operations.
• Extended IP List – Uses source and destination IP addresses and optional protocol information for matching
operations.
• MAC Extended List – Uses source and destination MAC addresses, VLAN ID and optional protocol information.
6. Enter a numeric index name for the ACL in the
7. Refer to the Status
something goes wrong in the transaction between the applet and the switch.
8. Click OK to use the changes to the running configuration and close the dialog.
9. Click Cancel
6.4.11.2 Adding a New ACL Rule
To add a new rule:
1. Select Security
2. Click the Configuration
3. Click the ACL
number, click the Clear Counters
field to assess the rules and precedence associated with each ACL. If necessary, rules
> Wireless Firewall from the main tree menu.
tab.
tab to view the list of ACLs currently associated with the switch.
button.
from the drop-down menu. The following options are available:
field for the current state of the requests made from applet. This field displays error messages if
to close the dialog without committing updates to the running configuration.
> Wireless Firewall from the main tree menu.
tab.
tab.
button.
ACL ID field.