Configuring Access Ports; Viewing Adopted Access Ports - Motorola WiNG 4.4 Reference Manual

4.9 Configuring Access Ports

Use the Access Port
unadopted Access Ports.

4.9.1 Viewing Adopted Access Ports

Use the Adopted AP
Use this information to determine whether the Access Port's version supports the optimal feature set available for the
network.
To view existing adopted Access Port information:
1. Select Network
2. Click the Adopted AP
3. Refer to the Adopted AP
Switch
MAC Address
Model
AP Type
Serial
HW Version
screen to view device hardware address and software version information for adopted and
tab for gathering device hardware address and software version information for the Access Port.
> Access Port from the main menu tree.
tab.
screen for the following information:
The Switch field displays the IP address of the cluster member associated with each AP.
When clustering is enabled on the switch and Cluster GUI is enabled, the
will be available on the AP configuration screen. For information on configuring enabling
Cluster GUI, see Managing Clustering Using the Web
Displays the radio's first MAC address when it is adopted by the switch.
Displays the model number of the Access Port.
Displays the Access Port type.
Displays the serial number of the Access Port, and is used for switch management
purposes. It is read-only and cannot be modified.
Displays the hardware version of the Access Port. This information can be helpful when
troubleshooting problems with the Access Port.
Network Setup 4 - 139
Switch
UI.
field