Motorola WiNG 4.4 Reference Manual page 61

3. Refer the System field to view or define the following information:
System Name Displays the designated system name. Provide a system name serving as a reminder of the user
base the switch supports (engineering, retail, etc.).
Location The Location parameter serves as a reminder of where the switch can be found. Define the
System Name as a specific identifier of the switch's location. Use the System Name and Location
parameters together to optionally define the switch name by the radio coverage type it supports
and physical location. For example, "second floor engineering."
Contact Displays a
the network administrator responsible for switch operations.
Uptime Displays the current operational time for the device name defined within the System Name field.
Uptime is the cumulative time since the switch was last rebooted or lost power.
Firmware Displays the current firmware version running on the switch. This version should be periodically
compared to the most recent version available on the Motorola Solutions Website, as versions
with increased functionality are periodically released.
AP License Count Displays the number of Access Port licenses currently available for the switch. This value
represents the maximum number of Access Ports the switch is licensed to adopt.
AAP License Count The License Count value displays the number of Adaptive AP licenses installed on this member.
Date (MM/DD/ Displays the day, month and year currently used with the switch.
YYYY)
Time Displays the time of day used by the switch.
Time Zone Use the drop-down menu to specify the time zone used with the switch. Adjusting the time zone
will in turn, cause an adjustment to the time displayed.
Country Use the drop-down menu to specify the correct country of operation. Selecting the country
incorrectly could render your switch as operating illegally.
Contact value for system administration and troubleshooting. This name should be
Switch Information 3 - 3