Motorola WiNG 4.4 Reference Manual page 179

1. Create a NAC include list.
RF Switch (config-wireless) #client include-list Desktop
RF Switch (config-wireless-client-list) #
NOTE: The instance changes from
client-list)
2. Add a host entry to the include list. This adds a specified MAC entry/MAC range into the client's include list.
RF Switch(config-wireless-client-list) #station pc1 AA:BB:CC:DD:EE:FF
RF Switch(config-wireless-client-list) #
3. Associate the include list to a WLAN. This adds the client's include list into the WLAN.
RF Switch(config-wireless-client-list) #wlan 1
RF Switch(config-wireless-client-list) #
4.5.6.2 Creating an Exclude List
To create a NAC Exclude List:
1. Define the NAC include list.
RF Switch(config-wireless) #client exclude-list Desktop
RF Switch(config-wireless-client-list) #
2. Add a host entry into the exclude list.
RF Switch(config-wireless-client-list) #station pc10 AB:BC:CD:DE:EF:FA
RF Switch(config-wireless-client-list) #
3. Associate the exclude list to a WLAN.
RF Switch(config-wireless-client-list) #wlan 1
RF Switch(config-wireless-client-list) #
4.5.6.3 Configuring the WLAN for NAC
Many handheld devices are required to bypass NAC, and a few laptops and desktops are required to be NAC validated.
1. Set the NAC mode for WLAN. A NAC validation is conducted for station entries in the include list. The station entries
are authenticated using the Radius server.
RF Switch(config-wireless) #wlan 1 nac-mode bypass-nac-except-include-list
RF Switch (config-wireless) #
2. Configure the WLAN's NAC server settings.
a. Configure the NAC Server's IP address.
RF Switch(config-wireless) #wlan 1 nac-server primary 192.168.1.10
RF Switch(config-wireless) #
b. Configure the NAC Server's Radius Key.
RF Switch(config-wireless) #wlan 1 nac-server primary radius-key my-secret
(config-wireless)
.
Network Setup 4 - 75
to
(config-wireless-