Motorola WiNG 4.4 Reference Manual page 420

6 - 68 WiNG 4.4 Switch System Reference Guide
NOTE: 192-bit AES and 256-bit AES are not supported for manual IPSec sa
configurations.
4. Highlight an existing policy and click the
scheme, hash value, authentication scheme, SA lifetime and DH group.
5. Select an existing policy and click the
6. If the properties of an existing policy are no longer relevant and cannot be edited to be useful, click the
define a new policy.
a. Configure a set of attributes for the new IKE policy:
Sequence Number
Encryption
Edit button to revise the policy's existing sequence number, encryption
Delete button to remove it from the table.
Define the sequence number for the IKE policy. The available range is from 1 to 10,000 with 1
being the highest priority value.
Set the encryption method used to protect the data transmitted between peers. Options include:
• DES 56-bit DES-CBC. The default value.
• 3DES - 168-bit Triple DES.
• AES - 128-bit AES.
• AES 192 - 192-bit AES.
• AES 256 - 256-bit AES.
Add button to