Motorola WiNG 4.4 Reference Manual page 519

11.If Server has been selected as the source, use the
log file to the target location.
12.Specify the appropriate Path
To parameter. If the local disk is selected, a browse button is available.
13.Click the Transfer button when ready to move the target file to the specified location. Repeat the process as necessary
to move each desired log file to the specified location.
14.If a problem condition is discovered during the file transfer, click the
15.Refer to the Status field for the current state of the requests made from applet. This field displays error messages if
something goes wrong in the transaction between the applet and the switch.
16.Click the Close button to exit the screen. No values need to be saved once the transfer has been made.
Password
name to the target directory on the local system disk or server as configured using the
parameter to enter the password required to send the
Abort button to terminate the transfer.
Diagnostics 8 - 13