Motorola WiNG 4.4 Reference Manual page 221

2. Click the Smart RF tab.
3. The following Smart RF details are displayed:
MAC Address Displays the Media Access Control (MAC) Address of each of the APs in the table.
Index Displays the numerical identifier assigned to each detector AP used in Smart RF calibration.
AP Name Displays the names assigned to each of the APs. The AP name can be configured on the
Access Port Radios Configuration page.
Type Displays the radio type of the corresponding APs.
Available types are:
• 802.11a
• 802.11an
• 802.11b
• 802.11bg
• 802.11bgn
Antenna Gain (dBi) Displays the current antenna gain value in dBi for each Access Port.
Coverage Rate Displays the current coverage rate for each Access Port based on the Smart RF settings.
(Mbps)
Is Detector Displays whether or not an Access Port is a detector or not.Detector status is determined
through Smart RF based on coverage and location of other APs in the network.
Lock Detector Displays whether or not each Access Port is locked in detector status.
Lock Channel Displays whether or not each Access Port is locked to a specific channel.
Lock Power Displays whether or not each Access Port is locked to a specific power level.
Network Setup 4 - 117