Table of Contents
Advertisement
4. Click the
tab and enter the title, header, footer, Small Logo URL, Main Logo URL, and Descriptive Text you would
Failed
like to display when users fail authentication with the switch-maintained hotspot.
Title Text
The Title Text is the HTML title displayed on the Failed page when using the internal Web
server. This option is only available if
Header Text
The Header Text specifies the HTML header displayed on the Failed page when using the
internal Web server. This option is only available if
menu above.
Footer Text
The Footer Text is the HTML footer text displayed on the Failed page when using the internal
Web server. This option is only available if
above.
Small Logo URL
The Small Logo URL is the URL for a small logo image displayed on the Failed page when
using the internal Web server. This option is only available if
drop-down menu above.
Main Logo URL
The Main Logo URL is the URL for the main logo image displayed on the Failed page when
using the internal Web server. This option is only available if
drop-down menu above.
Descriptive Text
Specify any additional text containing instructions or information for the users who access
the Failed page on the internal Web server. This option is only available if
from the drop-down menu above. The default text is: "Either the username and password are
invalid, or service is unavailable at this time."
5. Click the
Terms
tab to set the terms and conditions for display to the user.
Title Text
Header Text
Descriptive Text
6. Click the
Restore Defaults
7. Refer to the
field, and enter any IP address (for internal or external Web sites) that may be accessed by the
Allow List
Hotspot user without authentication.
NOTE: In multi-switch hotspot environments if a single switch's internal pages are
configured for authentication on the other switches, those switches will redirect to their
own internal pages instead. In these environments it is recommended to use an external
server for all of the switches.
8. Check the
Use System Name in Hotspot URL
screen as part of the hotspot address.
9. Check the
Logout on Browser Close
browsers.
10.Specify the maximum
Hotspot Simultaneous Users
for the selected VLAN.
11.TUse the
Accounting
drop-down menu to retrieve accounting information from the switch-managed network. You can
select None, Radius, or
Specifies the title displayed on the Terms and Conditions screen. This option is only available if
Internal
is chosen from the drop-down menu above.
Specifies the header text displayed on the Terms and Conditions screen. This option is only
available if
Internal
is chosen from the drop-down menu above.
Displays the terms and conditions.
button to revert to the default settings in the Internal (Generated) Web Page.
to use the
button to log out hotspot users from the network when they close their web
Syslog
from the menu for retrieving the accounting information.
Internal
is chosen from the drop-down menu above.
Internal
is chosen from the drop-down
Internal
is chosen from the drop-down menu
Internal
Internal
System Name
specified on the main Switch configuration
to set a limit on the number of concurrent unique hotspot users
Network Setup 4 - 169
is chosen from the
is chosen from the
Internal
is chosen
Advertisement
Table of Contents
Troubleshooting
