Motorola WiNG 4.4 Reference Manual page 96

3 - 38 WiNG 4.4 Switch System Reference Guide
• USB 1
• USB 2
Switch Note: USB 1 is available on the RFS6000 and RFS7000 switches. USB2 and Com-
pact Flash are only available on the RFS7000 switch.
Transfer files between the switch and the server from any one of the above mentioned locations. Since compact flash (CF)
and USB are external memory locations, the File System window displays the status of these devices. Transfer files to
compact flash and USB only if they are connected and available.
To view the file systems currently available to the switch:
1. Select Switch
2. Select the File System
3. Refer to the following
Name
Available
Formatted
> File Management from the main menu tree.
tab.
File Systems information.
Displays the memory locations available to the switch.
Displays the current status of the memory resource. By default, nvram and system are always
available.
• A green check indicates the device is currently connected to the switch and is available.
• A red X indicates the device is currently not available.
This displays the format status of the memory devices. This ensures that the external and internal
memory devices store the files securely. A formatted memory device is less prone to crash and loss
of data.
• A green check mark indicates that the device is currently connected to the switch and is
available.
• A red X indicates that the device is currently not available.