8-14
Overview
8.2 Configuring Interface using MSTP
MSTP runs by default. All VLANs are in default instance 0 by default.
1. Use the following command to create a non-default instance and region configuration using the
mode.
config
RFS7000(config-mst)#instance 1 vlan <vlan-id>
2. Use the following to enable/disable MSTP.
RFS7000(config)#bridge multiple-spanning-tree
3. Use the following command to configure spanning-tree.
RFS7000(config)#bridge multiple-spanning-tree
RFS7000(config)#spanning-tree
4. Use the following command to configure spanning-tree for ports.
RFS7000(config-if)#spanning-tree
mst