Viewing Ap Statistics - Motorola WiNG 4.4 Reference Manual

4 - 102 WiNG 4.4 Switch System Reference Guide
3. Click the Add
4. Enter the device
coded MAC address of the device.
5. Use the AP Type
AP-7131 model Access Point, the Access Port conversion will render the Access Point a "thin" Access Port.
6. From the Radio Settings
Available radio types are dependant on the
7. Enter a numerical value in the
The Radio Index is a numerical value assigned to the radio as a unique identifier. For example: 1, 2, or 3. The index is
helpful for differentiating radios of similar type and configuration.
8. Refer to the Status
something goes wrong in the transaction between the applet and the switch.
9. If clustering is configured and the Cluster GUI feature is enabled, the
the Apply to Cluster
10.Click OK to use the changes to the running configuration and close the dialog.
11.Click Cancel

4.7.2 Viewing AP Statistics

Refer to the Statistics
can be reviewed for either a 30 second or one hour interval. Use the
an individual radio.
To view Radio Statistics:
1. Select Network
button to display a screen containing settings for adding a radio
MAC Address (the physical MAC address of the radio). Ensure that this address is the actual hard-
drop-down menu to define the radio type you would like to add. If adding an AP-4131, AP-5131, or
section, select the radio type checkboxes corresponding to the type of AP radio used.
Radio Index
field for the current state of the requests made from applet. This field displays error messages if
button to apply the AP radio settings to all members in the cluster.
to close the dialog without committing updates to the running configuration.
tab for information and high-level performance data for individual radios. Performance information
> Access Port Radios from the main menu tree.
AP Type selected above.
field for each selected radio.
Apply to Cluster
Details
feature will be available. Click
button to display additional information for