Table of Contents
Advertisement
6 - 116 WiNG 4.4 Switch System Reference Guide
3. Click the
Add
4. Enter a
Key Label
5. Define the
Key Size
6. Refer to the
Status
something goes wrong in the transaction between the applet and the switch.
7. Click
OK
to save the changes to the running configuration and close the dialog.
8. Click
Cancel
6.9.2.2 Transferring Keys
The
Transfer
screen allows for the transfer of keys to and from the switch to (and from) a server or local disk. Transferring
keys is recommended to ensure server certificate key information is available if problems are encountered with the switch
and the data needs to be retreived.
1. Select
Security
2. Click the
Keys
3. Highlight a target file, and select the
4. Use the
From
a transfer location, use the default switch option.
5. Select a target file for the file transfer from the
The drop-down menu contains the log files listed within the Server Certificate screen.
6. Use the
To
drop-down menu to define whether the target log file is to be sent to the system's local disk (Local Disk) or
to an external server (Server).
7. Provide the name of the file to be transferred to the location specified within the
8. Use the
Using
9. Enter the
IP Address
button at the bottom of the screen.
in the space provided to specify a name for the new key pair.
between 1024 and 2048 bytes.
field for the current state of the requests made from applet. This field displays error messages if
to close the dialog without committing updates to the running configuration.
>
Server Certificate
from the main menu tree.
Tab.
Transfer Keys
drop-down menu to specify the location from which the log file is sent. If only the applet is available as
drop down-menu to configure whether the log file transfer is sent using FTP or TFTP.
of destination server or system receiving the target log file.
button.
File
drop-down menu.
Target
field.
Advertisement
Table of Contents
Troubleshooting
