Motorola WiNG 4.4 Reference Manual page 91

c. Use HTTP to get the firmware update from a Hyper Text Transfer Protocol (HTTP) server.
d. Use SFTP to get the firmware update from a Secure File Transfer Protocol (SFTP) server. A user account
must be established on the SFTP server specified for the firmware update.
Switch Note: On the RFS7000, users can also transfer firmware files using USB or Com-
pact Flash. On the RFS6000, users can also transfer firmware files using USB. On the
RFS4000, users can also transfer firmware files using USB or PCI Express card.
6. Enter the IP address for the FTP or TFTP server in the
7. Enter the username for FTP server login in the
8. Enter the password for FTP server login in the
9. Enter the complete file path for the file that contains the firmware update in the
10.Click the Do Update button to initiate the update.
A warning prompt displays. Upon confirming the firmware update, the switch reboots and completes the firmware
update.
CAUTION: When restarting or rebooting the switch, the Radius server is restarted
regardless of its state before the reboot.
11.Click OK to add the changes to the running configuration and close the dialog.
12.Refer to the Status field for the current state of the requests made from the applet. Requests are any "SET/GET"
operation from the applet. The Status field displays error messages if something goes wrong in the transaction
between the applet and the switch.
13.Click Cancel to close the dialog without committing updates to the running configuration.
IP address field.
User ID field.
Password field.
Switch Information 3 - 33
Path field.