Motorola WiNG 4.4 Reference Manual page 362

6 - 10 WiNG 4.4 Switch System Reference Guide
2. Click on the AP Containment
The AP Containment screen
3. To enable the AP containment feature, check the
between 20 and 5000 milliseconds.
The Containment Interval field determines the interval after which broadcast 802.11 de-authentication messages will
be sent.
4. When the containment feature has been enabled and a
to enable the feature and save the interval value.
5. The rogue AP table displays the following information about known rogue APs:
Index
Rogue BSS Mac
Number of Finders
Channel
6. To manually add a rogue AP to the table, click the
7. To remove an AP from the rogue AP table, select that AP and click the
tab.
is divided into two sections, configuration and rogue AP information.
A unique numerical ID assigned by the switch for each of the known rogue APs.
Display a list of all know Rogue BSS MAC Addresses known to the switch.
Displays the number of detector APs that have found each of the specified Rogue APs.
Displays the channels that each of the known Rogue APs are broadcasting on.
Enable Containment checkbox and specify a
Containment Interval
Add button and enter the MAC address of the known rogue AP.
Delete
Containment Interval
has been set, click the Apply
button.
button