Table of Contents
Advertisement
5. Click the Config button next to the
Addresses can be configured.
The MAC Authentication Format setting determines the text format that MAC addresses are transmitted when using
MAC-Auth authentication
6. Select a format for MAC Addresses used in MAC Authentication:
• No delimiter: The 12 digit MAC Address is in a format with no spaces or delimiters.
• Colon delimiter: The 12 digit MAC Address is in a format separated by colons after every pair.
• Dash delimiter: The 12 digit MAC Address is in a format separated by dashes after every pair.
• Dot delimiter per four: The 12 digit MAC Address is in a format separated by periods after every four digits.
• Middle Dash delimiter: The 12 digit MAC Address is in a format separated in the middle by a dash.
7. Click
OK
to use the changes to the running configuration and close the dialog.
8. Click
Cancel
to close the dialog without committing updates to the running configuration.
Configuring External Radius Server Support
If either the EAP 802.1x, Hotspot, or Dynamic MAC ACL options have been selected as an authentication scheme for a
WLAN, the
Radius Config...
Configuration
screen provides users the option of defining an external primary and secondary Radius Server as well as
a NAC Server if you do not use the switch's resident Radius Server.
NOTE: If using the switch's local Radius Server for user authentication instead of an
external primary or secondary Radius Server, see
6-90. The switch's local Radius Server provides an easy setup option and offers a high
degree of security and accountability.
The switch ships with a default configuration defining the local Radius Server as the primary authentication source (default
users are admin with superuser privileges and operator with monitor privileges). No secondary authentication source is
specified. However, Motorola
source and the local switch Radius Server as the secondary user authentication source. To use an external Radius Server
as either a primary or secondary authentication source, it must be specified appropriately.
To configure an external Radius Server for EAP 802.1x, Hotspot, or Dynamic MAC ACL WLAN support:
NOTE: To optimally use an external Radius Server with the switch, Motorola
recommends defining specific external Server attributes to best utilize user privilege
values for specific switch permissions. For information on defining the external Radius
Server configuration, see
Support on page
1. Select
Network
>
Wireless LANs
MAC Authentication
button at the bottom of the Network > Wireless LANs > Edit becomes enabled. The
recommends using an external Radius Server as the primary user authentication
Solutions
Configuring an External Radius Server for Optimal Switch
4-49.
from the main menu tree.
option to open a dialogue where the format of MAC
Configuring the Radius Server on page
Network Setup 4 - 47
Radius
Solutions
Advertisement
Table of Contents
Troubleshooting
