Configuring Ipsec Vpn Authentication - Motorola WiNG 4.4 Reference Manual

6 - 78 WiNG 4.4 Switch System Reference Guide
7. To add a new range of IP addresses, click the
provided. Click
8. Click Cancel

6.7.3 Configuring IPSEC VPN Authentication

If IKE is not used for establishing security associations, there is no negotiation of security associations. Consequently, the
configuration information in both systems must be the same for traffic to be processed successfully by the IPSec resource.
Select the Authentication
To define the IPSEc VPN authentication configuration:
1. Select Security
2. Select the Authentication
3. Define whether IPSec VPN user authentication is conducted using a Radius Server (by selecting the
button), by a user-defined set of names and password (by selecting the
is used for credential verification (by selecting the
4. Enter a NAS ID
The profile database on the Radius server consists of user profiles for each connected network access server (NAS)
port. Each profile is matched to a username representing a physical port. When the switch authorizes users, it queries
the user profile database using a username representative of the physical NAS port making the connection.
OK when completed to save the changes.
to disregard the changes and revert to the last saved configuration.
tab to define the credential verification mechanisms used with the IPSEC VPN configuration.
> IPSec VPN from the main menu tree.
tab.
for the NAS port.
Add button (within the IP Range tab) and define the range in the fields
User Table
No Authentication radio button).
Radius radio
radio button) or if no authentication