Table of Contents
Advertisement
2 - 2
WiNG 4.4 Switch System Reference Guide
2.1 Accessing the Switch Web UI
2.1.1 Web UI Requirements
The switch Web UI is accessed using Internet Explorer version 5.5 (or later) and SUN JRE (Java Runtime Environment) 1.5
(or later). Refer to the Sun Microsystems Web site for information on downloading JRE.
NOTE: To successfully access the switch Web UI through a firewall, UDP port 161 must
be open in order for the switch's SNMP back end to function.
To prepare Internet Explorer to run the Web UI:
1. Open IE's
Tools > Internet Options
2. Uncheck the following checkboxes:
• Use HTTP 1.1
• Java console enabled (requires restart)
• Java logging enabled
• JIT compiler for virtual enabled (requires restart).
2.1.2 Connecting to the Switch Web UI
To display the Web UI, launch a Web browser on a computer with the capability of accessing the switch.
NOTE: Ensure you have HTTP connectivity to the switch, as HTTP is a required to launch
the switch Web UI from a browser.
To display the switch Web UI:
1. Point the browser to the IP address assigned to the wired Ethernet port (port 2). Specify a secure connection using the
https:// protocol.
The switch login screen displays:
2. Enter the Username admin, and Password superuser. Both are case-sensitive. Click the
panel and select the
Advanced
tab.
Login
button.
Advertisement
Table of Contents
Troubleshooting
