Table of Contents
Advertisement
6 - 26 WiNG 4.4 Switch System Reference Guide
4. On the
Attach AAP WLAN
WLAN Index
IP ACL
Inbound/Outbound
5. Refer to the
Status
goes wrong in the transaction between the applet and the switch.
6. Click
OK
to use the changes to the running configuration and close the dialog.
7. Click
Cancel
6.4.5.2 Adding an Adaptive AP WLAN
To Add an AAP WLAN:
1. Select
Security
2. Click on the
Security Policy
3. Click on the
Wireless Filters
4. On the
Attach AAP WLAN
WLAN Index
IP ACL
Inbound/Outbound
tab select a WLAN and click the
Enter the WLAN Index to attach the WLAN with ACLs. The range is <0-2>.
Select an IP ACL configured for the WLAN interface in the inbound/
outbound direction.
Select either the Inbound or Outbound radio button to define which
direction the ACL applies.
field for the state of the requests made from applet. This field displays error messages if something
to close the dialog without committing updates to the running configuration.
>
Wireless Firewall
from the main menu tree.
tab.
tab.
tab and click the
Enter the WLAN Index to attach the WLAN with ACLs.
Select an IP ACL configured for the WLAN interface in the inbound/outbound direction.
Select either the Inbound or Outbound radio button to define which direction the ACL applies.
Edit
button:
Add
button:
Advertisement
Table of Contents
Troubleshooting
