Configuring Wmm - Motorola RFS Series Reference Manual

4-62 Motorola RF Switch System Reference Guide

4.5.3 Configuring WMM

Use the WMM
enabled/disabled designation, and Access Category.
To view existing WMM Settings:
1. Select Network
2. Click the WMM
The WMM
Idx
SSID
Description
WLAN enabled
WMM enabled
Access
tab to review a WLAN's current index (numerical identifier), SSID, description, current
> Wireless LANs from the main menu tree.
tab.
tab displays the following information:
Displays the WLANs numerical identifier. This field is displayed in a two part
format. The first number is the WLAN index and the second number is a sub-index
corresponding to the access category. Click the Edit button to modify this property.
Displays the Service Set ID (SSID) associated with each WLAN.
Displays a brief description of the WLAN.
Displays the status of the WLAN. A Green check defines the WLAN as enabled
and a Red "X" means it is disabled. The enable/disable setting can be defined
using the WLAN Configuration screen.
Displays WLAN-WMM status. It can be enabled (for a WLAN) from the WLAN
Configurations Edit screen by selecting the Enable WMM checkbox.
Displays the Access Category for the intended radio traffic. Access Categories are
the different WLAN-WMM options available.
The four Access Category types are:
• Background — Optimized for background traffic
• Best-effort — Optimized for best effort traffic
• Video — Optimized for video traffic
• Voice — Optimized for voice traffic