Fixing Drive Assembly; Removing The Fixing Drive Assembly/Fixing Motor - Canon 1000 Service Manual

4. MECHANICAL SYSTEM
11) Remove the mirror positioning tool.
The CLC1000 does not require ad-
justment of the cable tension.
REF.
4-18
COPYRIGHT © 2001 CANON INC.
E. Fixing Drive Assembly
1. Removing the Fixing Drive
Assembly/Fixing Motor
1) Remove the rear cover 1.
2) Remove the screw, and open the DC
controller PCB.
3) Remove the two screws [1], and disconnect
the four connectors [2]; then, remove the fixing
motor driver [3].
[2]
4) Remove the five screws [4], and remove the

fixing drive assembly [5].

[4]
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
[3]
[1]
Figure 4-201E
[5]
[4]
Figure 4-202E
[2]