Setting the Job Duration Display
Setting the Job Duration Display
Setting the Job Duration Display
Setting the Job Duration Display
When Job Duration Display is set to [On], the time remaining until completion of the copy job (Job
Duration Time) is indicated in minutes on the touch panel display.
NOTE
• • • •
The job duration time is shown as the [Print Time] in the screen displayed during printing.
• • • •
The job duration time is not displayed for the Transparency Interleaving, Cover/Sheet Insertion, Different Size
Originals, Rotate Collating, and Rotate Grouping modes or when the copy waiting time is less than one minute.
• • • •
The default setting is [Off].
1 1 1 1
Call up the desired screen as follows:
Call up the desired screen as follows:
Call up the desired screen as follows:
Call up the desired screen as follows:
2 2 2 2
Select [On] or [Off], and press [OK].
Select [On] or [Off], and press [OK].
Select [On] or [Off], and press [OK].
Select [On] or [Off], and press [OK].
3 3 3 3
Press [Done].
Press [Done].
Press [Done].
Press [Done].
Repeat this procedure.
The selected mode is set and the display returns to the Basic Features screen.
Setting the Job Duration Display
3 3 3 3
3-7
3-7
3-7
3-7