9.4.2 Removing the Deck Feed Sensor Unit
1) Remove the deck upper cover.
2) Remove the screw [1], and detach the
deck feed sensor unit [2].
3) Disconnect the connector [1], and free
the claw to remove the deck feed sensor
[2].
When removing the scanner
sensor, be sure to remove the
paint used to lock the claw in
place in advance to prevent
breaking the claw. When mount-
ing it, be sure the claw is not
displaced or the sensor is not
disoriented.
COPYRIGHT© 2001 CANON INC.
2000 2000 2000 2000
CANON iR105 REV.0 JULY 2001
CHAPTER 2 NEW FUNCTIONS
[2]
[1]
F02-904-03
[1]
F02-904-04
[2]
2-193