Electrical System; Removing The Side Deck Driver Pcb; Removing The Open Switch; Pcb - Canon GP605 Service Manual

CHAPTER 10 SIDE PAPER DECK
E.

Electrical System

1. Removing the Side Deck Driver

PCB

1) Detach the deck from the copier; then, re-
move the six screws, and detach the rear
cover.
2) Disconnect the nine connectors [1], and
remove the four screws [2]; then, detach
the deck driver PCB [3].
2. Removing the Open Switch PCB
1) Detach the deck from the copier, and push
down the latch plate [2] of the compart-
ment [1]; then, open the compartment [1].
10-44
COPYRIGHT © 1999 CANON INC.
[1]
Figure 10-E301
[2]
(rear)
Figure 10-E302
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[3]
[2]
[1]