Removing The Re-Pick Up Roller; Removing The Holding Tray Driver Pcb - Canon NP6251 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM

5. Removing the Re-Pick Up Roller

1) Open the front cover.
2) Slide out the holding tray assembly to the front.
3) Remove the mounting screw

6. Removing the Holding Tray Driver PCB

1) Open the front cover.
2) Slide the holding tray assembly to the front and out of the copier.
3) Turn over the holding tray assembly.
4) Remove the two mounting screws
.
5-104
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
(1 each), and remove the two pick-up rollers
Figure 5-876
, and remove the holding tray driver PCB cover
Figure 5-877
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.