Installing On The Control Console; Mks-9011A - Sony MKS-9011A Installation Manual

1-4. Installing on the Control Console

1-4-1. MKS-9011A

c
Be sure to install the MKS-9011A on the control console
by two or more persons. Installing it by one person may
cause backache.
The following parts supplied with the MKS-9011A are
required to install the MKS-9011A on the control console.
. Rack angle assembly (L) (R)
. Blank panel
. Screw B4 x 12 (6)
. Screw B5 x 8 (6)
. Screw B3 x 6 (4)
1. Remove the six screws (B4 x 6) of the MKS-9011A.
2. Remove the screws (B3 x 4) from the rack angle
assembly (L) and the rack angle assembly (R) respec-
tively, and remove the rack angle cover (L) and the
rack angle cover (R).
B4 x 6
B3 x 4
Rack angle
cover (L)
B3 x 4
Rack angle
assembly (L) Rack angle assembly (R)
CCP-9000A
MKS-9011A
B4 x 6
Rack angle cover (R)
3. Install the rack angle assembly (L) and the rack angle
assembly (R) on the MKS-9011A using the supplied
six screws (B4 x 12).
Rack angle assembly (L)
B4 x 12
4. Install the blank panel on the rack angle assemblies
with the supplied four screws (B3 x 6).
B3 x 6
Rack angle
assembly (L)
MKS-9011A
B4 x 12
Rack angle assembly (R)
Blank panel
B3 x 6
Rack angle
assembly (R)
1-7