Replacing The Toner Cartridge - Ricoh 4410L Operating Instructions Manual

Table of Contents

Advertisement

Troubleshooting

Replacing the Toner Cartridge

When the Add Toner indicator (D)
starts to blink, the toner cartridge is
almost empty. About 50 pages can be
printed while the Add Toner indica-
tor blinks, but replace the toner car-
tridge soon.
When the Add Toner indicator (D)
remains lit, printing is not possible.
R WARNING:
• Do not incinerate spilled toner
or used toner. Toner dust
4
might ignite when exposed to
an open flame.
• Dispose of the used toner car-
tridge in accordance with the
local regulations.
R CAUTION:
• Keep toner (used or unused) and
toner cartridges out of the reach
of children.
Important
❒ Used toner cartridges can be recy-
cled. Please contact the seller of
this machine.
❒ Make sure the power is turned on
when replacing the toner car-
tridge.
❒ Always use toner cartridges rec-
ommended specifically for this
model. Using any other type could
damage the machine.
❒ Do not leave the front cover open
for a protracted length of time. Ex-
posing the toner cartridge to light
for an extended period of time may
cause it to deteriorate, so replace
the cartridge as quickly as possi-
ble.
❒ Do not position the toner cartridge
upside down or at an angle.
90
A A A A
Open the front cover.
B B B B
Push the lever (A A A A ) and pull out
the old toner cartridge holding A A A A
and B B B B .
C C C C
Prepare the new toner cartridge.
Hold the cartridge horizontally
and shake it gently from side to
side a few times.
ZHMH090E

Advertisement

Table of Contents
loading

This manual is also suitable for:

4410nf

Table of Contents