Removal Of The Gearbox Assembly - Ducati Diavel Workshop Manual

Gearbox assembly: gearbox shafts
29 5 th , 6 th speed selector fork
30 Selector fork shaft
31 Shim, thickness 1
32 Needle roller retaining circlip (square cross-section)
Spare parts catalogue
Diavel ABS
GEARCHANGE CONTROL
Diavel ABS
GEARBOX
Diavel Carbon
GEARCHANGE CONTROL
ABS
Diavel Carbon
GEARBOX
ABS
Important
Bold reference numbers in this section identify parts not shown in the figures alongside the text, but which can be found in
the exploded view diagram.

Removal of the gearbox assembly

Operations
Remove the engine from the frame 9 - 1,
Remove the timing components
Remove the timing shaft unit
Remove the complete cylinder head
unit
Remove the cylinder barrel/piston
assemblies
Remove the alternator-side
crankcase cover and the alternator
assembly
Remove the oil pump
Remove the starter motor
Remove the clutch cover, drum and
bell
Remove the clutch cover
Remove the primary gear
Separate the crankcase halves
Withdraw the selector fork shafts (30).
Move the forks (28) and (29) to disengage them from the slots in the selector drum (14).
Withdraw the selector drum (16) taking care not to lose shims (31) and (27) mounted on the shaft. Note that the
positions of the shims must not be inverted.
Section reference
Removal of the engine
9 - 4.2, Removal of the timing belt
covers
9 - 4.4, Removal of the camshafts
9 - 4.5, Removal of the cylinder
heads
9 - 5, Removal of the
cylinder/piston assembly
9 - 8, Removal of the generator
cover
9 - 2.1, Removal of the oil pump
6 - 3, Starter motor
9 - 6.1, Removal of the clutch
9 - 6.2, Removal of the clutch-side
crankcase cover
9 - 6.3, Removal of the primary
drive gear
Separation of the
9 - 9.2,
crankcase halves