Trip 2" Meter; Distance Travelled On Fuel Reserve: "Trip Fuel - Ducati Diavel Workshop Manual

Instruments

"Trip 2" meter

This function shows the distance travelled since the Trip meter was last reset (in Km or miles depending on the specific
application).
Press and hold (1) "s" for 3 seconds while in this function to reset the trip odometer.
When the reading exceeds 9999.9, distance travelled is reset and the meter automatically starts counting from 0 again.
If the system measurement units are changed at any moment through the "Units of measurement modification function"
function of the Setting menu, or if there is an interruption in the power supply (Battery Off), the distance travelled is reset
and the count starts from zero (considering the newly set unit of measurement).

Distance travelled on fuel reserve: "TRIP FUEL"

This function shows the distance travelled on fuel reserve (in Km or miles depending on the specific application).
When the fuel light comes on, the display automatically switches to the "TRIP FUEL" indicator.
Trip fuel reading remains stored even after Key-Off until the vehicle is refuelled.
Count is interrupted automatically as soon as fuel is topped up to above minimum level.
When the reading exceeds 9999.9, it is reset and the count restarts automatically.