Ducati Diavel Workshop Manual page 684

Cylinder head assemblies: camshafts
Diavel ABS
HORIZONTAL CYLINDER HEAD
Diavel ABS
THROTTLE BODY
Diavel Carbon
CYLINDER HEAD: TIMING SYSTEM
ABS
Diavel Carbon
VERTICAL CYLINDER HEAD
ABS
Diavel Carbon
HORIZONTAL CYLINDER HEAD
ABS
Diavel Carbon
THROTTLE BODY
ABS
Important
Bold reference numbers in this section identify parts not shown in the figures alongside the text, but which can be found in
the exploded view diagram.
Removal of the camshafts
Operations
Remove the saddles
Remove air conveyor covers
Remove the tank half covers
Remove the fuel tank
Remove air conveyors
Disconnect the throttle cable
Remove the airbox, the throttle
body, the blow by and the oil
breather tube
Empty the coolant out of the
cooling system
Loosen the clamps of the hose that
connects the two radiators and the
hose that connects the RH radiator
to the union
Remove the water radiators leaving
them connected to the cooling
system
Remove the exhaust unit
Loosen the timing belt covers
Remove the coils
Remove the cylinder head cover
Unscrew and remove the screws (7) and the O-rings (8) from the cylinder head covers.
Remove the cylinder head cover (6).
Remove the gaskets (4) and (9).
Section reference
5 - 3, Removal of the seat
8 - 7, Removal of the air filters
5 - 2, Removal of the fuel tank
fairings
8 - 2, Removal of the fuel tank
8 - 7, Removal of the air filters
7 - 8.1, Removal of the throttle
twistgrip
8 - 6, Removal the airbox and
throttle body
4 - 3, Changing the coolant
9 - 3.1, Removal of the cooling
system hoses and unions
9 - 3.2, Removing the water
radiators
8 - 8, Removal of the exhaust
system
9 - 4.2, Removal of the timing belt
covers
6 - 9, Ignition coils
9 - 4.4, Removal of the camshafts