Ducati Diavel Workshop Manual page 817

Crankcase assembly: crankcase halves
Note
The two selector forks are identical.
Insert the fork of 5 th - 6 th speed (E) in the primary shaft driven gear and the pin (G) in the fork (E): the fork must be
fitted with the number indicating the gear facing the crankcase half.
Position the pin (G) of the forks (D) in the crankcase half. Holding the gear lever claw, position the gear drum (F) in the
crankcase half.
Position the pin (G) of the fork (E) in the crankcase half.
Install the crankcase with calculated shims in the crankcase half bearing: the shims (R) of the shaft must be placed with
the chamfering facing the shaft. Position the connecting rods (H) matching the corresponding seats of the cylinder.
Important
Make sure that the connecting rods (H) are correctly positioned in the cylinders. Incorrect positioning of the connecting
rods at this stage will inevitably lead to the need to re-open the crankcase halves.