Lap Activation/Deactivation Function (Lap Time) - Ducati Diavel Workshop Manual

Instruments
To access the function it is necessary to view the
function and press the reset button (3) to confirm.
The display shows the numerical value of the RPM with a precision of 50 rpm.
To exit the setting function, press the reset button (3) when "EXIT" is highlighted.

LAP Activation/Deactivation function (lap time)

This function activates and deactivates the LAP function (lap time).
To access the function it is necessary to view the
function and press the reset button (3) to enter the following page.
Function state is highlighted on the display (ON in green or OFF in yellow); use button (1) "s" or (2) "t" to shift the arrow
to the left onto the new setting and confirm by pressing the reset button (3).
To exit the setting function, press the reset button (3) when "EXIT" is highlighted.
Storing the "OFF" condition disables the LAP function.
Storing the "ON" condition enables the LAP function (see "LAP registration" paragraph).
Note
While the "LAP" function is active, the flash headlight button (6) both flashes the high beam headlight and Starts/Stops
the lap timer.
""Setting" menu", using buttons (1) "s" or (2) "t" select the "RPM"
""Setting" menu", using buttons (1) "s" or (2) "t" select the "LAP"